Foster® 30-30™ Insulfas® F.R. Lagging Adhesive is a quick setting water-based adhesive and coating used indoors to adhere and size canvas, glass, cloth or other lagging fabric over pipe and duct insulation. It is also used to attach woven glass fiber tape to the joints of hard fibrous glass insulation board. This product is designed for marine and industrial use, and may be top coated with solvent-based paints.

Foster® 30-30Q™ Insulfas® F.R. Lagging Adhesive is a quick setting water-based adhesive and coating used indoors to adhere and size canvas, glass, cloth or other lagging fabric over pipe and duct insulation. It is also used to attach woven glass fiber tape to the joints of hard fibrous glass insulation board. This product is designed for marine and industrial use, and may be top coated with solvent-based paints.

Foster® 70-60™ is a fire resistant water-based adhesive for bonding fiberglass and mylar facings to polyamide foam and fibrous glass insulations. It has good wet grab and sets rapidly to resist sliding of the facing on the insulation.

Foster® 81-05™ (blue) Attachment and Fabrication Adhesive is a quick setting, synthetic elastomer insulation adhesive. It has been designed for use in attaching low density (up to 3#) duct liner, fibrous glass insulation and facings. It uses a fast tacking flammable solvent system. It is commonly used for fabricating fibrous glass “wrap” type insulation.

Foster® 81-06™ (clear) Attachment & Fabrication Adhesive is a quick setting, synthetic elastomer insulation adhesive. It has been designed for use in attaching low density (up to 3#) duct liner, fibrous glass insulation and facings. It uses a fast tacking flammable solvent system. It is commonly used for fabricating fibrous glass “wrap” type insulation.

Foster® 81-27™ Fibrous Adhesive is a sodium silicate-based incombustible adhesive for bonding calcium silicate and expanded perlite thermal insulation to itself and to non-porous surfaces. It offers maximum adhesion and optimum working qualities and it forms a hard, brittle, incombustible film.

Foster® 81-27Q™ Fibrous Adhesive is a sodium silicate-based incombustible adhesive for bonding calcium silicate and expanded perlite thermal insulation to itself and to non-porous surfaces. It offers maximum adhesion and optimum working qualities and it forms a hard, brittle, incombustible film.

Foster® 81-33™ Fire Resistive Adhesive is a superior adhesive for cementing thermal insulation to all structural surfaces. It is quick setting, with good specific adhesion to iron, steel, aluminum, and most thermal insulations. Can be used without mechanical fastening for marine hull insulation.

Foster® 81-42™ Fire Resistive Lagging Adhesive and Coating is a quick setting water-based adhesive and coating used indoors to adhere and size canvas, glass cloth or other lagging fabric over pipe and duct insulation. It is also used to attach woven glass fiber tape to the joints of hard fibrous glass insulation board. This product is designed for marine and industrial use, and may be top coated with solvent-based paints.

Foster® 81-42Q™ Fire Resistive Lagging Adhesive and Coating is a quick setting water-based adhesive and coating used indoors to adhere and size canvas, glass cloth or other lagging fabric over pipe and duct insulation. It is also used to attach woven glass fiber tape to the joints of hard fibrous glass insulation board. This product is designed for marine and industrial use, and may be top coated with solvent-based paints.

Foster® 81-84™ Cellular Glass and Urethane Adhesive/Sealant is a two-component, high strength thermosetting urethane adhesive containing non-flammable solvents. It is designed to bond various types of low temperature insulation to themselves and to metal and masonry substrates. After curing, it forms a strong, yet flexible bond capable of withstanding thermal shock and mechanical impact.

Foster® 82-77™ Cryogenic Adhesive is a chemically curing composition which develops high tensile strength and adhesion, at room temperature, to a variety of surfaces including metal, wood, and masonry. It is supplied at virtually 100% solids enabling immediate bonding between non-porous surfaces without solvent entrapment problems.

Foster® 85-15™ Stic-Safe® Adhesive is a quick setting synthetic elastomer adhesive designed to adhere fibrous glass insulation (up to 6 lbs.) to sheet metal, such as galvanized steel or aluminum air-conditioning ducts, hot air ducts, and metal buildings. Fast drying. Permits bonding immediately or up to ten minutes open time.

Foster® 85-20™ Spark-Fas® Adhesive is a quick setting, non-flammable, fire resistive, synthetic elastomer adhesive used to adhere duct wrap, fibrous glass or mineral wool insulations (up to 6 lbs. density) to galvanized steel and aluminum air conditioning or hot air ducts, where a fire resistive dry film is required. Non-flammable chlorinated solvents eliminate explosion and fire hazards during application.

Foster® 85-53™ Facing and Laminating Adhesive was developed to bond various facing materials to fiberglass blankets. This product has been composite tested by Underwriters Laboratories, Inc. and meets the Fire Hazard Classification 25/50 with a wide variety of facing/fiberglass laminates.

Foster® 85-60™ Quick-Tack™ Adhesive is a high tack, rapid setting water-based adhesive designed for bonding low density (up to 3#/cu. ft.) duct liner, duct wrap and fibrous glass insulations to painted or unpainted steel, galvanized or aluminum surfaces.

Foster® 85-70™ Spark-Fas® WB Adhesive is a high tack, rapid setting water-based adhesive used to adhere fibrous glass or mineral wool insulations (up to 6 lbs. density) to painted or unpainted steel, galvanized or aluminum air-conditioning or hot air ducts. A synthetic elastomer emulsion, it is non-flammable when wet and extremely fire resistant when dry. Its consistency resists dripping and spattering.

Foster® 85-72™ Waterbased Contact Bond Adhesive is a high tack, rapid setting water-based adhesive designed for bonding low and medium density fibrous glass (up to 6#/cu. ft.) and polystyrene, urethane or polyimide foam insulations to painted or unpainted steel, galvanized or aluminum surfaces.

Foster® 85-75™ Drion® Contact Cement is a fast setting, water resistant adhesive for sealing the laps of vapor barrier jackets. Also used for bonding materials to a variety of surface in applications where immediate adhesion and high initial adhesive strength are required. Especially suited for bonding two impermeable surfaces. Non-flammable chlorinated solvents eliminate explosion and fire hazards during application.

Foster® 90-66™ Cryogenic Coating/Adhesive is a two-part black elastomeric coating/adhesive designed for use in cryogenic and specific chemical resistance applications. It is suitable for application to polyurethane foam, cellular glass and fibrous glass insulations in conjunction with aluminum, steel, wood and masonry construction materials.