Foster® 81-10™ S.M. Adhesive is a low cost, quick setting synthetic elastomer adhesive for use with fibrous glass insulation (up to 3 lbs./cu.ft.) duct wrap and acoustical linings for air handling ducts.

Foster® 81-42W™ Lagfas® Adhesive/Coating is a water-based polyvinyl acetate emulsion adhesive with typical quick setting properties, used extensively for adhering and sizing canvas and glass cloths, and other types of fabric covering over thermal insulation installed indoors. It presents a neat white cleanable finish, and will not yellow or become discolored with age. Cotton fabrics shrink tight and smooth onto the insultation.

Foster® 82-00™ Duct Liner Adhesive is an economical, quick setting, synthetic elastomer insulation adhesive with a flammable solvent system. It has been designed for use in attaching low density (up to 3 lbs.) duct liner and fibrous glass insulation to sheet metal.

Foster® 85-00™ Line-Fas™ Adhesive is an economical pure polymer water-based duct liner adhesive with excellent fire resistance, tack development, and bond strength.

Foster® 85-22™ Duct-Fas™ Adhesive is a red quick setting, synthetic elastomer insulation adhesive. It has been designed for use in attaching low density (up to 3#) duct liner, duct wrap, and fibrous glass insulation to sheet metal. It uses flammable solvent system.

Foster® 85-23™ Duct-Fas™ Adhesive is a blue quick setting, synthetic elastomeric insulation adhesive. It has been designed for use in attaching low density (up to 3#) duct liner, duct wrap, and fibrous glass insulation to sheet metal. Non-flammable chlorinated solvents eliminate explosion and fire hazards during application.

Foster® 85-50™ Pressure Sensitive Adhesive is a fast tacking water-based pressure sensitive adhesive used to adhere a wide variety of insulation materials to metal or other construction surfaces where immediate adhesion and high initial adhesive strength are required. It can be used either as a one way wet or dry bond, or as a two way contact cement. It is compatible with polystyrene foam insulation.

Foster® 85-60™ Quick-Tack™ Adhesive is a high tack, rapid setting water-based adhesive designed for bonding low density (up to 3#/cu. ft.) duct liner, duct wrap and fibrous glass insulations to painted or unpainted steel, galvanized or aluminum surfaces.

Foster® 85-62™ Jac-Tac® Adhesive is a black, rapid setting resin/polymer emulsion adhesive for use with low density fibrous glass insulation, duct wrap and acoustical linings (up to 3 lbs./c.f.) in air handling systems. It has good wet grab, and can be applied to painted or unpainted steel, galvanized steel or aluminum surfaces.

Foster® 85-65™ Stic-Fas™ Adhesive is a low odor, rapid setting resin/polymer emulsion adhesive for adhering low density fibrous glass insulation, duct wrap and acoustical linings (up to 3 lbs/c.f.) in air handling systems. It has good wet grab, and can be applied to painted or unpainted steel, galvanized steel or aluminum surfaces.